Washing machine drive belt: signs of wear, checks and replacement
The drive belt carries the turn from the motor to the drum. It runs from a small pulley on the motor shaft to the large pulley at the rear of the tub. When the motor turns, the belt turns the large pulley and the drum with it — in the wash and in the spin.
Not every machine has one. In direct-drive models (Direct Drive — most LG washing machines are built this way) the motor sits right on the drum shaft and there is no belt. If your machine is belt-driven, all of the drum's movement depends on the belt: a belt that has come off or snapped means the motor hums and turns while the drum stays still.
Signs of failure
- the motor runs or hums, but the drum does not turn in the wash or in the spin;
- with the machine switched off, the drum turns by hand noticeably more easily than usual — the belt has come off or broken;
- the machine does not spin or spins weakly: a stretched belt slips under load;
- a squeal or screech during the wash or the spin;
- a smell of burning rubber — the belt is rubbing and overheating;
- the belt comes off again soon after it was put back: this usually means a worn drum bearing, a loose drum pulley or a failing motor bearing.
When this part fails: Not spinning · Noisy or shaking on spin · Drum does not turn
How it is checked
Unplug the machine before any check.
- Open the door and turn the drum by hand. If it turns very easily, with almost no resistance, the belt has most likely come off or snapped. If the drum is stiff or grinds, the cause is more likely the bearings or the motor.
- Think back to the last wash: a squeal and a smell of burning rubber point to a slipping or worn belt.
- Do not keep washing until the belt is checked: if it is off, the laundry sits in water and the programme cannot finish.
What the technician checks:
- removes the back panel and inspects the belt: cracks, fraying, melted or glazed patches, stretching;
- checks that the large drum pulley is not loose and that the tub and motor bearings have no play — otherwise a new belt will come off again;
- if the belt is on and not slack and the drum turns freely by hand, looks for the cause in the motor or its control on the board;
- picks the belt by the marking on the old one and the machine's model.
Repair and replacement
A snapped, stretched or cracked belt is replaced with a new one — a quick repair done on the spot, without taking the machine away. A belt that came off but is undamaged can be refitted, but only after the reason it came off has been found.
How to read the belt marking: for example, 1270 J5 means a length of 1270 mm, the J rib profile and 5 ribs; the letters EL stand for an elastic belt. Belts of a different length or number of ribs do not swap, so the belt is chosen by the machine's model or the marking on the old belt. After fitting, the pulley is turned by hand to check that the belt sits in all the grooves.
A MasService technician comes to your home in any district of Baku, checks the belt, pulley, bearings and motor, and tells you the price before starting work.
Frequently asked questions
The motor hums but the drum does not turn — is it the belt?
Often, yes: turn the drum by hand with the machine off. If it turns very easily, the belt has most likely come off or snapped. If the belt is in place, the cause may be the motor or the board.
Can I simply put a belt that came off back on?
If it is undamaged, yes, but find the reason first: a belt rarely comes off by itself. A worn drum bearing, a loose pulley or a motor bearing is usually to blame, and unless they are repaired the belt will come off again.
Why is there a smell of burning rubber?
It happens when the belt slips on the pulley and heats up from friction — for example when it has stretched or worn. Such a belt is best replaced.
Does my machine have a belt?
Direct-drive machines (Direct Drive, including most LG models) have no belt — the motor sits right on the drum shaft. In many other machines a belt turns the drum.
Other parts
Washing machine repair — Brands
Could not fix it yourself? A technician comes to your home in Baku, finds the cause on site and names the price before the repair: Washing machine repair