Washing machine door lock (interlock): signs of failure, testing and replacement
The door lock (interlock) locks the door at the start of a programme and keeps it shut while the drum turns and there is water inside. A programme only starts once the board gets the signal that the door is locked — so a faulty lock shows up in one of two ways: the machine will not start, or the door will not open after the wash.
Locks differ. Many use a bimetal strip: when current flows it heats up and locks the door, and after the wash it has to cool down — which is why the door opens not straight away but after a minute or two, on some models after several minutes (Samsung, for example, states 3 minutes). Other locks release the door as soon as the programme ends, usually with an audible click. And on some machines the water itself also holds the door: while there is water in the tub, the lock will not open.
Signs of failure
- the machine will not start: the door is shut but does not lock, the lock indicator does not light and the programme does not begin;
- a door or lock error: DE/dE1 on LG, dE/dE1 on Samsung, F16/F34 on Bosch, E40–E42 on Electrolux, AEG and Zanussi, F06 on Indesit and Ariston, E01 on Beko, Candy and Hoover;
- the door does not open after the programme ends, although there is no water in the drum and more than a few minutes have passed;
- the door does not click shut or springs open after closing.
When this part fails: Door will not open · Will not turn on or start
How it is checked
Before calling a technician, rule out the simple causes:
- Check the door is properly shut: a sock or the edge of a garment between the door and the cabinet will stop the lock working.
- Make sure the child lock is off — it locks the control panel and, on some machines, the door as well.
- If the door will not open after a wash, wait a few minutes: the lock releases it with a delay.
- If there is water left in the drum, drain it first — the door will not open while there is water in the tub.
- Do not force the handle: you are more likely to break the handle or the catch than open the door.
What the technician checks:
- the catch (hook) on the door, the handle and the hinges: if the catch is broken or the door has dropped, there is nothing for the lock to hold;
- the lock itself: whether it gets voltage and whether it operates;
- the wiring from the lock to the board and the connectors;
- the part of the board that controls the lock: sometimes the fault is not the lock but a relay on the board;
- the water level system: if it "thinks" there is still water in the tub, the door may stay locked.
Repair and replacement
A faulty lock is usually not repaired but replaced as a unit — the replacement is quick and done on site. Bosch also notes that a faulty door lock is not a fault you can repair yourself. If the catch or handle is broken, they are replaced; if the fault is on the board, the board is repaired.
If the door is locked with wet laundry inside, the technician opens it carefully without damaging the door or the door seal. Many models have an emergency release cord or lever, usually behind the pump filter flap; use it only after draining the water and with the plug pulled out.
A MasService technician comes to your home anywhere in Baku, checks the lock, the door and the board, and names the price before starting.
Frequently asked questions
Why will the machine not start although the door is shut?
A programme only starts once the lock has locked the door and the board has received the signal. Check that the door is properly shut and no laundry is in the way. If everything is fine but the machine will not start or shows a door error, the lock, the door catch or the wiring is faulty.
How long should I wait for the door to unlock?
Usually from one to several minutes: the lock has to cool down. Samsung, for example, states 3 minutes after the machine stops. If more time has passed, the water has drained and the door still will not open, you need a technician.
Is the lock repaired or replaced?
The lock itself is usually replaced as a unit. But the technician first checks that it really is the lock: a broken door catch, the wiring and the relay on the board that drives the lock cause the same symptoms.
Other parts
Washing machine repair — Brands
Could not fix it yourself? A technician comes to your home in Baku, finds the cause on site and names the price before the repair: Washing machine repair