Washing machine drain pump: signs of failure, testing and replacement

The drain pump pumps the water out of the tub after washing and rinsing and pushes it through the drain hose into the waste pipe. It sits at the bottom of the machine, behind a small flap on the front panel. In front of the pump there is a filter that catches coins, buttons, lint and small items so they do not reach the impeller.

The pump only runs while draining, but the whole programme depends on it: until the water is out, the machine will not spin and will not unlock the door. That is why a failed pump almost always looks the same — the machine does not drain and shows a drain error. Below is how to tell a blockage from a faulty pump.

Call now

Signs of failure

  • the machine does not drain or drains very slowly, water stays in the drum;
  • a drain error on the display: OE on LG, 5E/5C on Samsung, E18/F18 on Bosch and Siemens, E20 on Electrolux and AEG, F05 or F11 on Indesit and Ariston, E03 on Beko;
  • the pump hums during draining but no water moves — the impeller is jammed or broken;
  • there is no sound at all during draining — the pump gets no power or its winding has burnt out;
  • the pump rattles or grinds loudly — a foreign object is in the pump chamber or the impeller is worn;
  • water appears under the machine near the filter;
  • the machine smells of stale water because water stays in the tub and the hose.

When this part fails: Not draining · Not spinning · Bad smell

How it is checked

You can check a lot yourself. Unplug the machine before you start and let the water cool after a hot wash.

  1. Run Drain or Spin and listen. A hum without water moving usually means a blockage or a jammed impeller; complete silence points to the pump's power supply or its winding.
  2. Unplug the machine, open the flap at the bottom and drain the water through the emergency hose or by slowly unscrewing the filter, a little at a time, into a shallow container.
  3. Take the filter out, clean it and look into the opening: is thread or hair wrapped around the impeller, are its blades intact, is there a bra wire or a coin inside?
  4. Refit the filter, screw it in firmly and check that nothing leaks from it.
  5. Check the drain hose: if it is kinked or blocked, even a working pump cannot push the water out.

What the technician checks:

  • whether the pump gets voltage during draining — if not, the cause is the wiring or the board;
  • the resistance of the pump winding — an open circuit or an out-of-range value means the pump must be replaced;
  • the impeller and pump housing, the connectors and the hoses;
  • the water level sensor: if the machine "thinks" the tub is already empty, it may not start draining.

Repair and replacement

If the filter and hose are clear but the water does not drain, or the pump only hums or stays silent, it needs replacing. This is one of the most common and quickest washing machine repairs: the pump is replaced on site, without taking the machine away. On many models only the pump motor with the impeller is replaced, while the housing with the filter stays.

To make the new pump last longer:

  • clean the filter every few months and after washing items that shed lint;
  • check pockets before washing;
  • wash underwired bras in a laundry bag.

A MasService technician comes to your home anywhere in Baku, checks the pump, the wiring and the level sensor and names the price before starting the work.

Error codes related to this part

Frequently asked questions

The pump hums but the water does not drain — what does it mean?

Usually a foreign object has jammed the impeller or the filter is blocked. Clean the filter and check the impeller. If everything is clear and the pump still only hums, it needs replacing.

Can I keep using the machine if the pump drains poorly?

Better not: water stands in the tub and starts to smell, the laundry is not spun, and a pump working against a blockage overheats and fails sooner.

Why is the pump silent during draining?

Either it gets no power — then the wiring or the board is to blame — or the pump winding has burnt out. A technician tells the two apart by measuring.

Could not fix it yourself? A technician comes to your home in Baku, finds the cause on site and names the price before the repair: Washing machine repair

Call now WhatsApp