Washing machine shock absorbers: signs of wear, testing and replacement

The tub with the drum inside a washing machine is not fixed rigidly: it hangs on springs at the top and rests on shock absorbers (dampers) at the bottom. The springs carry the tub, and the shock absorbers damp its swinging — especially as the spin speeds up while wet laundry sits unevenly in the drum.

Inside a shock absorber there are usually friction pads, and they wear over time. The tub then swings more and more, the machine knocks as it speeds up, shakes and can move across the floor. Uneven installation, transit bolts left in and worn bearings cause similar symptoms, so these are ruled out first.

Call now

Signs of failure

  • a dull thump or knocking as the spin speeds up;
  • the machine shakes hard, jumps or walks at high speed even though it is level and the transit bolts are out;
  • the tub hits the sides of the cabinet on the spin;
  • when you press the drum down hard and let go, it bounces up and down two or three times instead of settling back in one smooth movement.

When this part fails: Noisy or shaking on spin

How it is checked

First rule out the causes that need no repair:

  1. Make sure the transit bolts at the back have been removed — especially if the machine is new or has been moved.
  2. Check the level: all four feet should stand on the floor and the machine should not rock.
  3. Do not overload the drum and do not spin one heavy item on its own — add a few towels.
  4. Test the shock absorbers: unplug the machine, open the door, press down hard on the front edge of the drum and let go sharply. Healthy shock absorbers bring the tub back to rest in one smooth movement. If it bounces up and down two or three times, they are worn.
  5. Turn the empty drum by hand: if you hear grinding and feel it catch, the cause is more likely the bearings. Bearings rumble all the time, while shock absorbers make themselves known mostly on the spin.

What the technician checks:

  • the shock absorbers and their mountings on the tub and cabinet;
  • the suspension springs;
  • the counterweights: the concrete weights on the tub can work loose and knock;
  • the drum spider: if the machine bangs even during the wash and the drum sags and rubs on the door seal, the spider may have cracked.

Repair and replacement

Shock absorbers are replaced in pairs: a new one working against a worn one gives uneven resistance, the tub keeps swinging and the new part wears faster. The replacement is done at your home. Along with the shock absorbers the technician checks the springs, counterweights and spider.

Do not keep using a machine with worn shock absorbers for long: the tub hitting the cabinet strains the bearings and mountings, and the machine can move and pull on its hoses.

A MasService technician comes to your home anywhere in Baku, finds the cause of the knocking — installation, shock absorbers, counterweights or bearings — and names the price before starting.

Frequently asked questions

How can I test the shock absorbers myself?

Unplug the machine, open the door, press down hard on the front edge of the drum and let go. If the tub settles back in one smooth movement, the shock absorbers are fine. If it bounces up and down two or three times, they are worn.

Can I replace just one shock absorber?

It is not recommended. A new shock absorber paired with a worn one gives uneven resistance: the tub keeps swinging and the new part wears faster. That is why they are replaced in pairs.

The machine only knocks as the spin speeds up — is it the shock absorbers?

Often, yes: bearings rumble all the time, while worn shock absorbers show up mostly on the spin. But first check the transit bolts, the level and the load in the drum.

Could not fix it yourself? A technician comes to your home in Baku, finds the cause on site and names the price before the repair: Washing machine repair

Call now WhatsApp