HC Samsung dryer error HC — overheating

High severity

This code also exists on other appliances: Samsung HC — Washing machine error codes, Samsung HC — Dishwasher error codes

What it means

If your Samsung dryer shows HC: the air or the compressor has overheated and the protection has tripped.

Likely causes

Clogged lint filter, dirty condenser (heat exchanger), blocked or kinked vent hose, too little air around the dryer, faulty temperature sensor.

Full guide to this fault: Tumble dryer smells burnt, damp or musty: causes and what to do

Safe steps you can try

Switch off and let the dryer cool down. Clean the lint filter, the second filter (if fitted) and the condenser as described in the manual, and leave space for air behind and beside the dryer.

Dryer heating and sensors: step-by-step check

  1. Unplug the dryer for 10–15 minutes: if the overheat protection has tripped, it needs to cool down.
  2. Clean the lint filter in the door opening — it should be cleaned after every load.
  3. On a condenser dryer rinse the heat exchanger behind the lower flap; on a heat-pump model clean the lower filter.
  4. Empty the condensed-water container.
  5. Wipe the metal strips of the moisture sensor inside the drum with a soft cloth: fabric-softener film stops them sensing moisture.
  6. Do not overload the drum, and check that the room is not hot and has fresh air. Start the programme again.

When to call a technician

If the error returns after cleaning, stop using the dryer: the temperature sensors and the heating/compressor circuit need checking.

What a technician will check

A technician checks the temperature sensors, the heater and thermal cut-out, on heat-pump models the compressor and circuit, and the control board.

In Baku? A technician comes to your home within 60 minutes and gives the price after diagnostics, before the repair. 6-month warranty.

Call now · +994 50 566 53 58 Message on WhatsApp

Frequently asked questions

How do I reset error HC on a Samsung?

Switch the appliance off, unplug it for 10–15 minutes and switch it on again. If the cause is still there, the code comes back: a reset clears the message from memory, it does not repair the fault.

Can I keep using the appliance while HC is showing?

Better not: the laundry stays damp, and overheating can damage both the clothes and the dryer.

The dryer runs but the laundry is still wet — why?

Usually the air cannot flow: the lint filter or heat exchanger is clogged. If cleaning changes nothing, the heater or heat pump is checked.

Couldn't fix it yourself? A technician can come to your home in Baku: Samsung — Dryer repair

Call now WhatsApp