AE6 Samsung dryer error AE6 — board communication
High severity
What it means
If your Samsung dryer shows AE6: communication between the main control board and the display/keypad board has failed.
Likely causes
Corroded connectors, broken wire, moisture on the board, failed board component.
Safe steps you can try
Unplug the appliance completely for 15 minutes and plug it back in.
Electronics and power: step-by-step check
- Unplug the dryer for 10–15 minutes and switch it on again.
- Test the socket with another appliance. Plug the dryer straight into a wall socket — no extension lead or multi-plug.
- If the code appears at the same time of day, the mains voltage is dipping; try drying later.
- Check the panel: no button should be stuck, and the child lock must be off.
- Start the programme again. If the code returns, it needs diagnosing.
When to call a technician
If it persists, the boards and the cable between them should be checked by a technician; board repair is often cheaper than replacement.
What a technician will check
A technician measures the voltage, checks the connectors, the power supply and memory of the control board, and repairs or replaces the module if needed.
In Baku? A technician comes to your home within 60 minutes and gives the price after diagnostics, before the repair. 6-month warranty.
Frequently asked questions
How do I reset error AE6 on a Samsung?
Switch the appliance off, unplug it for 10–15 minutes and switch it on again. If the cause is still there, the code comes back: a reset clears the message from memory, it does not repair the fault.
Can I keep using the appliance while AE6 is showing?
No: the electronics cannot run the drying, so the programme will not start or will stop.
Does the whole board have to be replaced?
Not always. A board can often be repaired: burnt components replaced or contacts restored. That becomes clear after diagnosis.
Couldn't fix it yourself? A technician can come to your home in Baku: Samsung — Dryer repair