dC Samsung dryer error dC — door open

Low severity

This code also exists on other appliances: Samsung dC — Washing machine error codes

What it means

If your Samsung dryer shows dC: the appliance reports that the door is not closed.

Likely causes

Door not fully shut, faulty door switch or lock.

Safe steps you can try

Close the door firmly and make sure nothing is in the way.

Dryer door: step-by-step check

  1. Open the door and close it firmly until it clicks. Check that no laundry is trapped.
  2. Clean lint out of the latch and the lock opening.
  3. Check that the lint filter is pushed all the way in: a filter that sits wrongly stops the door from closing.
  4. Unplug the dryer for 10–15 minutes and start the programme again.

When to call a technician

If the door is shut and the error persists, the door switch or lock should be checked.

What a technician will check

A technician checks the latch and the door switch, the wiring and the control board.

In Baku? A technician comes to your home within 60 minutes and gives the price after diagnostics, before the repair. 6-month warranty.

Call now · +994 50 566 53 58 Message on WhatsApp

Frequently asked questions

How do I reset error dC on a Samsung?

Switch the appliance off, unplug it for 10–15 minutes and switch it on again. If the cause is still there, the code comes back: a reset clears the message from memory, it does not repair the fault.

Can I keep using the appliance while dC is showing?

No: while the dryer thinks the door is open, the programme will not start.

The door is closed, but the dryer says it is open — why?

The latch is worn or the door switch is faulty: the door shuts, but the contact does not close.

Couldn't fix it yourself? A technician can come to your home in Baku: Samsung — Dryer repair

Call now WhatsApp