E16 Siemens dishwasher error E16 — no water fill

Medium severity

This code also exists on other appliances: Siemens E16 — Washing machine error codes

What it means

If your Siemens dishwasher shows E16: the dishwasher cannot fill with enough water within the expected time and stops the program.

Likely causes

Tap closed or not fully open, low water pressure, clogged mesh filter in the inlet hose, kinked hose, tripped Aquastop valve, faulty inlet valve.

Parts checked for this error: Dishwasher water inlet valve

Safe steps you can try

Check the tap is fully open and you have water pressure. Unplug the dishwasher, turn off the tap, unscrew the inlet hose and rinse the mesh filter at its end, and make sure the hose is not kinked. Then restart the program.

Dishwasher water supply: step-by-step check

  1. Make sure the tap feeding the dishwasher is open and there is water in the house.
  2. Look at the inlet hose: it must not be kinked or squashed by furniture.
  3. Close the tap, unscrew the hose and rinse the mesh filter at the inlet.
  4. If the hose has an Aquastop block at the tap end, look at its indicator: if it is red, the protection has tripped and the whole hose has to be replaced.
  5. Check the drain hose: it should rise in a loop under the worktop. If it lies on the floor, the water siphons out.
  6. Close the door firmly and start the programme again.

When to call a technician

If water flows normally but the error returns, the inlet valve, Aquastop or control board needs checking.

What a technician will check

A technician checks the water inlet valve, the flow meter, the level sensor and the circuits on the control board.

In Baku? A technician comes to your home within 60 minutes and gives the price after diagnostics, before the repair. 6-month warranty.

Call now · +994 50 566 53 58 Message on WhatsApp

Frequently asked questions

How do I reset error E16 on a Siemens?

Switch the appliance off, unplug it for 10–15 minutes and switch it on again. If the cause is still there, the code comes back: a reset clears the message from memory, it does not repair the fault.

Can I keep using the appliance while E16 is showing?

You cannot wash dishes: without water the programme will not start. Do not restart it again and again — check the tap, the hose and the mesh filter first.

There is water at the tap, but E16 appears — why?

Most often the inlet mesh is clogged, the Aquastop has tripped or the inlet valve does not open. The valve is tested and replaced by a technician.

Couldn't fix it yourself? A technician can come to your home in Baku: Siemens — Dishwasher repair

Call now WhatsApp