F01 Hisense washing machine error F01 — not filling with water
Medium severity
What it means
Error F01 on a Hisense washing machine is a water inflow fault: the machine does not get enough water, or filling takes too long. It usually appears a few minutes after the programme starts — the machine tries to fill, does not reach the level in the time it allows, and stops.
F01 is shown by Hisense models with two-digit F codes (F01, F03, F13…) — machines with a remaining-time display. Other Hisense models use a different list (there, for example, the water inlet fault is E1), so check your machine's manual.
Likely causes
- the water tap is closed or not fully open;
- low water pressure in the building;
- the inlet hose is kinked or crushed;
- the filter mesh at the inlet valve is clogged;
- the inlet valve is faulty — the most common cause when there is water in the house;
- the water level sensor (pressure switch) or its tube is faulty;
- a poor contact in the valve wiring;
- less often, the control module.
Full guide to this fault: Washing machine not filling with water: causes and what to do
Parts checked for this error: Water inlet valve
Safe steps you can try
- Make sure the tap feeding the machine is fully open.
- Open another tap in the flat: if the pressure is weak or there is no water, the machine is not the problem.
- Check the inlet hose along its whole length — it must not be kinked or trapped under furniture.
- Turn the water off, unscrew the hose from the machine and clean the filter mesh at the valve inlet (an old toothbrush under running water).
- Screw the hose back on, turn the water on and check for drips.
- Press Start/Pause, or switch the machine off and on, and start the programme again.
When to call a technician
If there is water in the house, the hose and mesh are clear and F01 comes back, call a technician. They test the inlet valve (a faulty valve is replaced, not repaired), the water level sensor and its tube, the wiring and, if all of these are fine, the control module.
A MasService technician comes to you, finds the cause on the spot and tells you the price before any repair starts.
In Baku? A technician comes to your home within 60 minutes and gives the price after diagnostics, before the repair. 6-month warranty.
Frequently asked questions
Why does F01 appear a few minutes after starting?
The machine allows itself a limited time to fill. If the water does not reach the required level in that time, the programme stops and F01 appears.
Can I wash with an F01 error?
No — the programme will not run without water. Check the tap, hose and valve mesh first; if the error stays, the valve and the level sensor need testing.
Does F01 mean the same on every Hisense washer?
On models with two-digit F codes, F01 is described as a water inflow fault. Hisense code meanings depend on the model: on machines with single-digit codes F1 means something else, so check the manual.
Couldn't fix it yourself? A technician can come to your home in Baku: Hisense — Washing machine repair