dC3 Samsung washing machine error dC3 — AddWash door lock

Medium severity

What it means

If your Samsung washing machine shows dC3: the lock of the AddWash door (the small door for adding laundry) does not lock or unlock properly — Samsung shows this as dC3/dE3.

Likely causes

The AddWash door is not fully closed, laundry or foam is caught in it, or the small door lock (solenoid) or its wiring is faulty.

Safe steps you can try

Open and firmly close the AddWash door and make sure nothing is in the way. As Samsung advises, switch the washer off, wait a few minutes and start the cycle again.

Door and lock: step-by-step check

  1. Open the door and close it firmly until it clicks. Check that no laundry is caught between the door and the rubber seal.
  2. Look at the door hook and the handle: the hook must not be loose or broken, and the door must not sag on its hinges.
  3. Clean lint and detergent residue out of the lock opening with a dry brush.
  4. Unplug the machine for 10–15 minutes: the lock cools down and releases. Then switch on and start the programme again.
  5. Do not pull a locked door and do not wedge it shut: that is how handles and locks get broken.

When to call a technician

If dC3 comes back after the restart, the AddWash door lock and its wiring need checking and the lock may need replacing.

What a technician will check

A technician checks the door lock (interlock), its wiring and connector, the handle and hook, and the lock control circuit on the board.

In Baku? A technician comes to your home within 60 minutes and gives the price after diagnostics, before the repair. 6-month warranty.

Call now · +994 50 566 53 58 Message on WhatsApp

Frequently asked questions

How do I reset error dC3 on a Samsung?

Switch the appliance off, unplug it for 10–15 minutes and switch it on again. If the cause is still there, the code comes back: a reset clears the message from memory, it does not repair the fault.

Can I keep using the appliance while dC3 is showing?

No: until the machine senses a closed and locked door, the programme will not start.

How do I open the door if it is locked?

Switch the machine off and wait 2–5 minutes — the lock releases. If there is water in the tub, drain it through the filter at the bottom first. Many models have an emergency release pull next to the filter.

Couldn't fix it yourself? A technician can come to your home in Baku: Samsung — Washing machine repair

Call now WhatsApp