bE2 Samsung washing machine error bE2 — button stuck
Low severity
What it means
If your Samsung washing machine shows bE2: one of the control panel buttons has been held down for too long (stuck) — the board treats this as a fault and will not start a cycle.
Likely causes
Dirt, moisture or detergent residue under the button, water on the control panel, a mechanically damaged button, a control board fault.
Full guide to this fault: Washing machine will not turn on or start: what to do
Parts checked for this error: Control board (electronic module)
Safe steps you can try
Switch the machine off and press and release every button one by one — a stuck one can usually be felt. Wipe the panel with a damp (not wet) cloth. Then unplug the machine for 5–10 minutes and plug it back in.
Electronics: step-by-step check
- Unplug the machine for 10–15 minutes: this clears a one-off electronics glitch.
- Check the control panel: no button should be stuck, and no water or steam should be getting onto the panel.
- Make sure the child lock is off (a padlock or key symbol on the display).
- Think back: was there a power cut or a surge just before the code appeared? The board suffers most after those.
- Switch on and start a short programme. If the code returns, the board needs diagnosing.
When to call a technician
If the error comes back, the button panel or the control board needs checking and, if necessary, replacing.
What a technician will check
A technician checks the connectors and the cable between the panel and the control board, the board power supply and its memory, and repairs or replaces the module if needed.
In Baku? A technician comes to your home within 60 minutes and gives the price after diagnostics, before the repair. 6-month warranty.
Frequently asked questions
How do I reset error bE2 on a Samsung?
Switch the appliance off, unplug it for 10–15 minutes and switch it on again. If the cause is still there, the code comes back: a reset clears the message from memory, it does not repair the fault.
Can I keep using the appliance while bE2 is showing?
No: the electronics cannot run the wash, so the programme will not start or will stop.
Does the whole board have to be replaced?
Not always. A board can often be repaired: burnt components replaced or contacts restored. That becomes clear after diagnosis.
Couldn't fix it yourself? A technician can come to your home in Baku: Samsung — Washing machine repair