F41 Miele dryer error F41 — control board
High severity
This code also exists on other appliances: Miele F41 — Washing machine error codes
What it means
If your Miele dryer shows F41: a memory (EEPROM) or processor error has been detected on the control board.
Likely causes
Memory corruption after a power surge, moisture on the board, failed board component.
Safe steps you can try
Unplug for 15 minutes, plug back in and try selecting a program.
Electronics and power: step-by-step check
- Unplug the dryer for 10–15 minutes and switch it on again.
- Test the socket with another appliance. Plug the dryer straight into a wall socket — no extension lead or multi-plug.
- If the code appears at the same time of day, the mains voltage is dipping; try drying later.
- Check the panel: no button should be stuck, and the child lock must be off.
- Start the programme again. If the code returns, it needs diagnosing.
When to call a technician
If it persists, the control board needs repair or reprogramming.
What a technician will check
A technician measures the voltage, checks the connectors, the power supply and memory of the control board, and repairs or replaces the module if needed.
In Baku? A technician comes to your home within 60 minutes and gives the price after diagnostics, before the repair. 6-month warranty.
Frequently asked questions
How do I reset error F41 on a Miele?
Switch the appliance off, unplug it for 10–15 minutes and switch it on again. If the cause is still there, the code comes back: a reset clears the message from memory, it does not repair the fault.
Can I keep using the appliance while F41 is showing?
No: the electronics cannot run the drying, so the programme will not start or will stop.
Does the whole board have to be replaced?
Not always. A board can often be repaired: burnt components replaced or contacts restored. That becomes clear after diagnosis.
Couldn't fix it yourself? A technician can come to your home in Baku: Miele — Dryer repair