d75 LG dryer error d75 — vent blocked
Medium severity
What it means
If your LG dryer shows d75: the dryer exhaust is partly blocked; the number shows the blockage percentage.
Likely causes
Full lint filter, kinked or lint-clogged exhaust duct, closed wall outlet.
Safe steps you can try
Clean the lint filter after every load. Check and clean the exhaust duct and wall outlet, make sure the duct is not kinked.
Filter and airflow: step-by-step check
- Take out the lint filter and remove the lint by hand. Once a month wash the mesh under the tap: fabric-softener film blocks it.
- Put the dry filter back all the way in: many models will not start without it.
- Clean lint out of the filter housing and off the door seal.
- On a condenser dryer rinse the heat exchanger; on a vented model check that the vent hose is not crushed or blocked.
- Leave free space around the dryer and do not cover the air grille.
When to call a technician
If the error remains after cleaning, the internal air duct and temperature sensors need checking.
What a technician will check
If the code stays after cleaning, a technician checks the fan, the air ducts, the temperature sensors and the control board.
In Baku? A technician comes to your home within 60 minutes and gives the price after diagnostics, before the repair. 6-month warranty.
Frequently asked questions
How do I reset error d75 on a LG?
Switch the appliance off, unplug it for 10–15 minutes and switch it on again. If the cause is still there, the code comes back: a reset clears the message from memory, it does not repair the fault.
Can I keep using the appliance while d75 is showing?
No. With a clogged filter the dryer overheats and takes several times longer to dry.
How often should a dryer filter be cleaned?
Remove the lint after every load, wash the mesh under the tap about once a month, and clean the heat exchanger as the manual for your model says, usually every one to three months.
Couldn't fix it yourself? A technician can come to your home in Baku: LG — Dryer repair