OC Samsung dishwasher error OC — overfill
Medium severity
What it means
If your Samsung dishwasher shows OC: the water level is higher than allowed or the base protection has tripped — the dishwasher pumps out and stops.
Likely causes
Inlet valve stuck open, faulty level sensor or flow meter, heavy foam from hand dishwashing liquid, an internal leak.
Safe steps you can try
Turn off the tap and unplug the dishwasher. Make sure you are not using hand dishwashing liquid. Switch it on again after a few minutes — it should pump out the extra water itself.
Leak and overfilling: step-by-step check
- Close the water tap and unplug the dishwasher.
- Think back to what you put in: ordinary washing-up liquid makes a great deal of foam, which runs into the base tray and trips the protection.
- Wipe the door seal and check that no dishes stop the door from closing tightly.
- Check the inlet and drain hose connections behind the dishwasher and under the sink.
- If there is water in the base tray under the tub, the code will not go until it is removed: a float sensor sits there. Tilting a built-in dishwasher yourself is risky — leave it to a technician.
When to call a technician
If it overfills again as soon as the tap is opened, the inlet valve or level sensor must be replaced; do not leave it connected.
What a technician will check
A technician finds the leak (hoses, pump, seals, sump), dries the base tray and checks the float sensor and the Aquastop system.
In Baku? A technician comes to your home within 60 minutes and gives the price after diagnostics, before the repair. 6-month warranty.
Frequently asked questions
How do I reset error OC on a Samsung?
Switch the appliance off, unplug it for 10–15 minutes and switch it on again. If the cause is still there, the code comes back: a reset clears the message from memory, it does not repair the fault.
Can I keep using the appliance while OC is showing?
No. While the leak protection is active, the dishwasher only pumps out and does not wash. Keep the tap closed.
Why does the pump hum all the time with error OC?
The leak protection has tripped: as long as there is water in the base tray, the dishwasher keeps pumping and will not start a programme.
Couldn't fix it yourself? A technician can come to your home in Baku: Samsung — Dishwasher repair