E18 Candy dishwasher error E18 — water level sensor

Medium severity

What it means

If your Candy dishwasher shows E18: the control board is not getting a valid signal from the water level sensor (pressure switch).

Likely causes

Blocked or detached pressure switch tube, faulty sensor, wiring or connector problem.

Safe steps you can try

Unplug the appliance for 10–15 minutes and plug it back in. Clean the drain filter — a blockage can affect level readings.

Leak and overfilling: step-by-step check

  1. Close the water tap and unplug the dishwasher.
  2. Think back to what you put in: ordinary washing-up liquid makes a great deal of foam, which runs into the base tray and trips the protection.
  3. Wipe the door seal and check that no dishes stop the door from closing tightly.
  4. Check the inlet and drain hose connections behind the dishwasher and under the sink.
  5. If there is water in the base tray under the tub, the code will not go until it is removed: a float sensor sits there. Tilting a built-in dishwasher yourself is risky — leave it to a technician.

When to call a technician

If the error returns, the pressure switch, its tube and wiring need testing.

What a technician will check

A technician finds the leak (hoses, pump, seals, sump), dries the base tray and checks the float sensor and the Aquastop system.

In Baku? A technician comes to your home within 60 minutes and gives the price after diagnostics, before the repair. 6-month warranty.

Call now · +994 50 566 53 58 Message on WhatsApp

Frequently asked questions

How do I reset error E18 on a Candy?

Switch the appliance off, unplug it for 10–15 minutes and switch it on again. If the cause is still there, the code comes back: a reset clears the message from memory, it does not repair the fault.

Can I keep using the appliance while E18 is showing?

No. While the leak protection is active, the dishwasher only pumps out and does not wash. Keep the tap closed.

Why does the pump hum all the time with error E18?

The leak protection has tripped: as long as there is water in the base tray, the dishwasher keeps pumping and will not start a programme.

Couldn't fix it yourself? A technician can come to your home in Baku: Candy — Dishwasher repair

Call now WhatsApp