F21 Whirlpool washing machine error F21 — not draining

Medium severity

What it means

If your Whirlpool washing machine shows F21: the appliance cannot pump the water out in time.

Likely causes

Clogged drain filter, kinked or blocked drain hose, blocked household drain, faulty drain pump.

Safe steps you can try

Switch off, put a towel down and open the drain filter at the bottom to clean it. Check the drain hose is not kinked and the waste connection is not blocked.

Draining: step-by-step check

  1. Switch the machine off and unplug it. Put a shallow tray and towels in front of it: water will come out of the filter.
  2. Open the small flap at the bottom front. Let the water out through the emergency hose, or by unscrewing the pump filter anticlockwise a little at a time.
  3. Rinse the filter: coins, buttons, hair and lint collect there. Look into the housing — the pump impeller should turn when you push it with a finger.
  4. Check the drain hose: it must not be kinked or squashed. Take it off the sink trap and make sure the trap and the waste pipe are not blocked.
  5. Screw the filter back in firmly, switch on and run "Drain" or "Spin". You should hear the pump, and the water should be gone within a minute or two.

When to call a technician

If the filter is clean and water still does not drain, the drain pump or its circuit is faulty.

What a technician will check

A technician checks the drain pump (winding, power supply, impeller), the hose between the tub and the pump, the water level sensor with its tube, and the pump control circuit on the board.

In Baku? A technician comes to your home within 60 minutes and gives the price after diagnostics, before the repair. 6-month warranty.

Call now · +994 50 566 53 58 Message on WhatsApp

Frequently asked questions

How do I reset error F21 on a Whirlpool?

Switch the appliance off, unplug it for 10–15 minutes and switch it on again. If the cause is still there, the code comes back: a reset clears the message from memory, it does not repair the fault.

Can I keep using the appliance while F21 is showing?

No. Water stays in the tub, the cycle cannot reach the spin and the door stays locked. Do not force the door — drain the water through the filter first.

The door will not open after error F21 — what should I do?

The lock stays shut while there is water in the tub. Drain it through the filter at the bottom, switch the machine off and wait 2–3 minutes — the lock will release.

Couldn't fix it yourself? A technician can come to your home in Baku: Whirlpool — Washing machine repair

Call now WhatsApp