E02 Amica washing machine error E02 — no water fill

Medium severity

What it means

If your Amica washing machine shows E02: the appliance cannot fill with enough water within the expected time and stops the cycle.

Likely causes

Tap closed or not fully open, low water pressure, clogged inlet filter screen, kinked inlet hose, faulty inlet valve.

Safe steps you can try

Check the tap is fully open and you have water pressure. Unplug the appliance, unscrew the inlet hose and rinse the small mesh filter in the valve, make sure the hose is not kinked.

Water supply: step-by-step check

  1. Make sure the tap feeding the machine is fully open and that there is water in the house: open a kitchen or bathroom tap.
  2. Look at the inlet hose behind the machine: it must not be kinked or squashed.
  3. Close the tap, unscrew the inlet hose and rinse the small mesh filter at the machine inlet and at the tap end of the hose: sand and rust clog it.
  4. Close the door firmly until it clicks: the machine will not fill with the door unlocked.
  5. Check the drain hose: if it lies on the floor, the water siphons out as soon as it comes in. The hose must rise to the height given in the manual, usually 60–100 cm above the floor.
  6. Switch on and start a short programme. If no water comes in within 2–3 minutes, the machine needs diagnosing.

When to call a technician

If the tap and filter are fine but the error returns, the inlet valve and control board need testing.

What a technician will check

A technician checks the water inlet valve (coils and mesh), the level sensor, the wiring and the valve control circuit on the board.

In Baku? A technician comes to your home within 60 minutes and gives the price after diagnostics, before the repair. 6-month warranty.

Call now · +994 50 566 53 58 Message on WhatsApp

Frequently asked questions

How do I reset error E02 on a Amica?

Switch the appliance off, unplug it for 10–15 minutes and switch it on again. If the cause is still there, the code comes back: a reset clears the message from memory, it does not repair the fault.

Can I keep using the appliance while E02 is showing?

You cannot wash: without water the programme will not start. Do not restart it again and again — check the tap, the hose and the mesh filter first.

There is water at the tap, but E02 still appears — why?

Most often the inlet mesh is clogged or the inlet valve does not open. You can rinse the mesh yourself; the valve is tested and replaced by a technician.

Couldn't fix it yourself? A technician can come to your home in Baku: Amica — Washing machine repair

Call now WhatsApp